Guide :Camping, Backpacking & Hiking : 3 Cell D Blue Flashlight S3D116

Keeps turning itself off when adjusting beam

Hi, I use the 3D Maglite at work and have found lately the beam has been turning off when I adjust the beam by turning the cap or even if I just move the torch around. Have tried new batteries etc, but no help. This is my second Maglite after the first one did the same thing after about 18 months of use.

Research, Knowledge and Information :


FAQ | Mr Beams® - Wireless LED & Motion Sensor Lights


When you walk into the room, the motion sensor should trigger turning the light on. ... Once the light shuts off it should perform correctly, ...
Read More At : www.mrbeams.com...

Lighting Problems - Los Angeles Electrician


Los Angeles Electrical Contractor providing electrical help with lighting problems. Call Now! (800) 990-9490. Call For a Free Estimate! ... Lights Not Turning Off.
Read More At : www.theelectricconnection.com...

MD QandA for Beam Services & Repairs - MD Central Vacuum


My Serenity Plus Powerbrush had been turning off and ... Beam Services & Repairs. ... Try putting the hose backwards into an inlet or into the Beam Central Vacuum itself.
Read More At : builtinvacuum.com...

AdaptiveFront Lighting System(AFS)


The adaptive front lighting system ... during cornering or turning. To turn the AFS on, ... AFSOff Switch AutomaticHeadlight Adjusting System 144 AFS OFF SWITCH
Read More At : techinfo.honda.com...

Projector People : Frequently Asked Questions


Frequently Asked Questions. Our Tech Support team tackles tough technical questions every day. Here is a short list of questions and answers to common projector problems.
Read More At : www.projectorpeople.com...

FAQs For Multimedia Projectors - NEC Display


For any technical questions related to NEC Multimedia Projectors you get answers here. United States ... leave it plugged in until the fan turns itself off.
Read More At : www.necdisplay.com...

Headlights Problems of the 2003 GMC Envoy


Headlights problems of the 2003 ... who informed that the low beam ... almost every time the headlights are used and does not resolve itself upon turning car on/off.
Read More At : www.carproblemzoo.com...

Alarm going off sporadically by itself? - Mazda 6 Forums ...


Alarm going off sporadically by itself? I am currently out of town and my wife back at home tells me after two weeks of my car sitting without being ran the panic ...
Read More At : forum.mazda6club.com...

Suggested Questions And Answer :


Keeps turning itself off when adjusting beam


It sounds like the spring in the tail cap may be depressed which would cause intermittent contact with the negative end of the Batt. Shake the flashlight vigorously, you should NOT hear ANY noise. If you DO, take the end cap off and pull on the spring, you are trying to stretch it out a bit, replace the cap and shake it again. Go through these steps until it is QUIET when you shake it. Also make sure there's NO CORROSION at the Positive and Negative ends of the contacts. Maglites are pretty user friendly and the best light money can buy. I have the rechargeable model which I carried for 21 years during my tour in law enforcement. Anyway, if it still refuses to work properly, go to; www.maglite.com they are based in California. They will help you get it going. Good luck. :)
Read More At : 3 Cell D Blue Flashlight S3D116...

When I shake it it goes off


The switch is bad, contact Maglite at www.maglite.com and they will repair it under Warranty.
Read More At : 3 Cell D Blue Flashlight S3D116...

Batterys stuck in a maglite flashlight - MagLite 3 Cell D Blue Flashlight S3D116


Ok, problem is the acid has corroded and caused a white powder residue to form, you will have to spray a solvent into the torch to free the batteries... bad news? the corrosion cannot be fully cleared and the maglite will always be on the blink... sorry but i have tried several times for people and just cannot clear it out fiully
Read More At : 3 Cell D Blue Flashlight S3D116...

A cell (Duracell D) has got stuck in the barrell of my 3 D cell torch. All efforts to pry it loose with a sharp intrument have failed.


Most likely the Duracell Battery in there is corroded and had fused itself to the inner aluminum wall of the light. MagLite warranties their flashlight if damage from a battery was caused by either a Duracell, Ever-ready or Ray-O-Vac battery. Same thing happened to me, I brought it to their Repair Center in Ontario, CA and they tried to remove the battery while I waited, they couldn't remove it so the gave me a brand new flashlight. They are real good about backing up their product. www.maglite.com You can call them at CONTACT INFORMATION Corporate OfficeMAG Instrument, Inc.2001 South Hellman AvenueP.O. Box 50600Ontario, California 91761 U.S.A. Business Hours:Monday - Friday 8:00 a.m.- 5:00 p.m. Pacific Time Sales & Parts: PhoneFax 909 947-1006909 947-3116 Corporate Gift Sales: PhoneFax 909 947-1006909 947 3056 Warranty / Service Address: MAG Instrument, Inc.1721 East Locust Street - 51453Ontario, California 91761-7769 Warranty Business Hours: Monday - Friday 7:00 a.m. - 4:30 p.m. Pacific Time Warranty: PhoneFax 909 947-1006909 947-5041
Read More At : 3 Cell D Blue Flashlight S3D116...

I have a 4 D cell maglite. I have had it for about 10 years. The batteries leaked and froze in the unit. It was major work to remove them. In the process the part of the light that holds the bulb was lost. Can that part be replaced?


I had the same thing happen to me a few years ago. I got the address of the battery company (which is on battery), mailed them a hand written letter, explaining what happened, and they sent me a new flash, with batteries. But, that was when companies had warrenties that said if our batteries ever harm your product in any way, we will replace it free of charge. It's worth a try....oh...also....you will have send the old flash light and batteries, after, or with your letter.TJS
Read More At : 3 Cell D Blue Flashlight S3D116...

Flashlight only works when end cap is partially on. Will not work when cap is fully screwed in. New batteries installed.


I've never hear of this being a 'feature.' Consider searching for a replacement tailcap, for the contact it makes with the batteries may be faulty. You can also contact Maglite and ask them to honor the warranty.
Read More At : 3 Cell D Blue Flashlight S3D116...

Battery stuck in main tube


This has happened to me several times. You can begin removing the bulb and reflector from its end of the flashlight. I then get a very long (5 or 6 inch) deck screw, the kind that has very coarse wood screw type threads. I screw this into the swollen battery (you may need to drill a small diameter pilot hole in the botton of the battery) and pull on the screw with pliers to see if the battery will budge. If it wont budge, I then stand the flashlight with the battery compartment up, fill it with water, leave it overnight, drain the water and pull on the deck screw again, this usually removes the battery. NOTE: The magnesium in these flashlights rapidly corrodes away in the presence of battery leakage, so if the battery has leaked a lot, you may be left with only the undamaged components to use as spare parts to repair other lights. ALSO: If you batteries have a no-leak guarantee, contact the manufacturer' customer service for your free Maglight.
Read More At : 3 Cell D Blue Flashlight S3D116...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.backpackingtips.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0207 seconds