Guide :Camping, Backpacking & Hiking : Porta Potti

When I flush, no water comes out?

How the heck do you get the fuse out to see if there is a blown fuse? Where it is located, makes it virtually impossible.

Research, Knowledge and Information :


Toilet Rim Holes Not Working - Plumbing - DIY Home ...


Toilet Rim holes not working. ... The Rim jets however have No water coming out ... dump some red food coloring in the tank and flush it, see if any is coming out the ...
Read More At : www.diychatroom.com...

Tub gurgles when toilet is flushed - now water coming out of ...


Tub gurgles when toilet is flushed - now water coming out of tub ... Just a moment ago, my husband flushed and the gurgling began then water and grime began to come ...
Read More At : www.bobvila.com...

toilet slow flushing and when I plunge, water comes out on ...


When I flush, water comes up in bowl but does not overflow. Water drains slowly until there is very little left in the bowl. When I plunge, water comes out of the ...
Read More At : answers.angieslist.com...

There is no water coming out of the holes under the rim of


There is no water coming out of the holes under the rim of my toilet. What can I do to fix this? It doesn't seem to be a buildup problem because no water is coming at ...
Read More At : www.justanswer.com...

Sloan Flushmate Troubleshooting Guide


Sloan Flushmate Troubleshooting Guide. A) ... counterclockwise until you can lift it out of the ... sluggish, or no flush Inadequate water ...
Read More At : www.flushmaterepairparts.com...

OHW • View topic - Flush toilet and water comes up in tub????


Flush toilet and water comes up in tub???? ... Just a little water comes up into the tub. ... the water comes out my tub.
Read More At : www.oldhouseweb.com...

How to Toilet Repair | Ask the Builder


I'm not getting any water coming from the floor hose to the toilet tank it was flushing and then all of the sudden no water coming ... water out everytime I flush ...
Read More At : www.askthebuilder.com...

Troubleshoot Your Toilet Without a Plumber


Dec 16, 2009 · The way water comes in and goes out of the home is one of those processes we take for granted--until we can't take a shower or make the toilet flush ...
Read More At : www.popularmechanics.com...

Suggested Questions And Answer :


We have a thetford C200cs on the motorhome we have just bought (2003). No water seems to pump, & the blue flush button doesn't seem to work. Are there any instructions availabe? The fuse has been checked & is OK. Does the led come on all the time, or only when flushed? (which it won't do) VC


Red light is just a reed switch that turns on the LED when a floating magnet inside the cassette floats up (when the cassette is full) and switches on the reed switch thereby switching on the LED. It just tells you the cassette is full and you need to empty it. I'd say either your button or electric valve is broken. All the button does is allow the electric valve to break the seal that allows water to flow from your onboard water system. I'll assume that the water in the rest of your motorhome is working? So check the switch first. You can lever off the switch/LED panel and remove the square connector from the back of the button. Get a multimeter and set it to either Continuity or Resistance (Ohms). Place the connectors on 2 of the switch pins and press the switch (the switch is actually 2 switches with 4 pins, but each pair of pins is connected together) - if you get a beep (if multimeter on continuity) or low resistance reading (if on resistance) then the switch is working - if this is the case then it's probably the electric valve. If the switch is not working, then that's your culprit. When you replace the connecter you can replace it either way round.
Read More At : Porta Potti...

Casset toilet will not pump water for flush


Open door, remove toilet cassette unit, look in under flush water tank, observe a short metal blade that actuates a safety switch. This is between two plastic guides. Now look just outside the right hand guide. There you will find the fuse which is a standard blade type. Just pull it down to remove from holder. You will probably find it rated at 3 amp. If it is blown you will probably have to replace pump. Looks difficult but is actually dead easy. Instructions come with replacement Thetford pump. Only problem you may have is a perished sealing ring on the paper holder cup which is no longer available as a spare. Just use a good quality outdoor type sealant as a replacement. Be sure to recover any bits of broken ring from the flush water tank as these can be drawn into your replacement pump and cause it to sieze. At minimum this will cause you to say bother! Happy repairing.
Read More At : Porta Potti...

Water tank on motor home toilet very dirty black grim coming away when flushing have emptied out what do I do to clean tank not accessible


There is no total and final solution to the problem of black mould growth in the water reservoir during the winter. Before the start of the touring season you could fill with a bicarbonate of soda solution to kill off the mould. Leave for 24 hours and then flush out. You then need to rinse out with fresh water until mould clears. In severe cases you may find that travelling with water sloshing around in the flush tank will loosen more flakes of mould. These should flush away quite soon and you will have the problem under control.
Read More At : Porta Potti...

When I flush, no water comes out?


Open door, remove toilet cassette unit, look in under flush water tank, observe a short metal blade that actuates a safety switch. This is between two plastic guides. Now look just outside the right hand guide. There you will find the fuse which is a standard blade type. Just pull it down to remove from holder. You will probably find it rated at 3 amp. If it is blown you will probably have to replace pump. Looks difficult but is actually dead easy. Instructions come with replacement Thetford pump. Only problem you may have is a perished sealing ring on the paper holder cup which is no longer available as a spare. Just use a good quality outdoor type sealant as a replacement. Be sure to recover any bits of broken ring from the flush water tank as these can be drawn into your replacement pump and cause it to sieze. At minimum this will cause you to say bother!Happy repairing.
Read More At : Porta Potti...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.backpackingtips.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0149 seconds