Guide :Camping, Backpacking & Hiking : Legacy X6 6V Xenon CR123A Blk

Blackhawk Legacy X9-P Won't work replaced old batteries nothing

I just replaced the batteries in my Blackhawk flashlight after it wouldn't come on. After spending $45 for new batteries it still won't work.

Research, Knowledge and Information :

10 Lessons I Learned From The Worst Gun I Ever Bought

10 Lessons Learned from the Worst Gun I ... there are people who won’t buy a particular gun ... So much for the idea that short 1911s don’t work. Wayne Williams.
Read More At :

Solved: Laptop wont turn on after new battery. - the Community

Hi JKIMFORLIFE. Make sure that you've purchased the exact battery for your computer. Try turning ON the computer using only the AC adapter, if it doesn't work the ...
Read More At :

#1 Gunblast Blackhawk - (UPDATE 2017) Kris And Larry

★★★ Gunblast Blackhawk ... you are at and also what equipment you need work who have. Gunblast Blackhawk This ... an old cheap blade and a flat sedimentary ...
Read More At :

Recondition NiCad Batteries For FREE - YouTube

May 11, 2012 · Recondition NiCad Batteries For FREE ShySkyBros. ... Restore-Revive-Zap Old Dead Drill ... Fixing and Repairing Nicd Batteries that Won't Charge ...

Blackhawk Night-Ops Xiphox NTX 180 Lumen Weapon Light

The Blackhawk Night-Ops Xiphox NTX 180 Lumen Weapon Light ... and when he called Blackhawk, they replaced it ... light that won't blind me but enough where I ...
Read More At :

Batteries, Battery Charger, Power Supplies |

Find batteries, battery chargers and power supplies for your device. AtBatt's easy to use Battery Select Technology ensures you the perfect power match.
Read More At :

Poulan Pro PP4218AVX 18-Inch 42cc 2-Cycle Gas-Powered Anti ...

11 x 32 x 9.5 in: 10.24 x 17.32 x ... I want to sell it immediatley and get a machine that I can do work with, not look ... It simply won't stay running for more ...

Scooter Questions - Get Answers to Scooter Repair Questions Here!

I have a Chase 50 scooter 2007 and my dash won't work, ... but it won't start, lights are off, nothing ... The first thing I did was replace the battery and ...
Read More At :

Suggested Questions And Answer :

Blackhawk Legacy X9-P Won't work replaced old batteries nothing

If you have an ohm meter, you can check the bulb to see if the bulb has burned out. It is possible that the bulb has failed. Another thing to check is inside the tube of the flashlight to make sure that you are getting a good, clean contact at the top end of the tube and at the bottom, normally where the spring makes contact with the bottom of the battery. Sometimes the contact become corroded or coated with a slight "glaze" which prevents power flow through the flashlight. Gie them a good going over and wipe off any residue that might be there. The last thing to check is the switch itself, although not know to fail very often, they sometimes do due to being subjected to rough handling or a good jolt from being dropped, etc. Just follow the path of checking everything in the chain and you should be able to get the light working again.
Read More At : Legacy X6 6V Xenon CR123A Blk...

Removal of end cap

Most likley cause is that the batteries in the flashlight have leaked and has caused the threads on the end cap and flashlight to become fused. If at all possible, try to stand the end of the flashlight in a small plastic container with some PB Blaster, or other decent penetraiting oil, (WD-40 doesn't do very well in this situation). After letting it soak overnight a good 24 hours, put the body of the flashlight into a vice, preferably with rubber or plastic jaws/protectors to keep from galling up the body of the light. Use a good sized pipe wrench to lossen the end cap and spray some penetrating oil onto the threads as you expose more, until loose. You will mark up the end cap, but you'll get it off. Once off, remove the batteries and use some baking soda to neutralize the battery acid. Rinse with water to clean and let dry. Remove any obstructions inside the battery tube with a wooden chopstick, or end of a wooden spoon (so as not to gouge or damage the aluminum tube) Get as much of this crude out and wipe dry. You should be able to freely insert and remove the batteries, if not, keep cleaning the crude until the batteries go in and out easily. Last ditch approach is to return the light to Maglight for them to repair and service. They'll return the light to you just like new, but there will be a charge for their service. Just check their web site for repair details.
Read More At : Legacy X6 6V Xenon CR123A Blk...

Niether one of my Executive defenders nor my G2 will work and I have new batteries!!!

Strange how all the units have failed. Sounds like more of a battery problem. Are you using brand name batteries like Surefire, Energizer etc? I had two boxes of Chinese import batteries and most of them failed. I put them into a number of items and had problems. I stopped using them and opted to pay the extra for 'real' batteries. A bad battery can do more harm that just going flat. If it releases too much power when turned on because it isn't properly regulated it can fry the bulb or electronics in those things so equiped. Having said that the big companies also have sets of 'lemmon' batches too. If you have spare globes. First try some other batteries. If it doesn't work then use those batteries and the new globe.
Read More At : Camping, Backpacking & Hiking...

2 year old, well maintained Myo XP that has never been submerged or been seriously soaked. Yesterday, I turned it on and 1 second later it went out. Batteries are good. Wiring solid. No battery level display LED either. Nothing works. Bulb shouldn't just "blow" (it is an LED...) Switch?

Its a bit late now i know ; although somebody may get some use out of the information 'that' the 'myo xp' has a manufacturers warranty of 36 months (3 years), mine has gone the same way after 18 months so its about to go ,back to its roots !
Read More At : Myo XP LED Headlamp...

My Mini mag AA worked until I took it apart to install an LED kit

Start with a new mini-mag and put the upgrade in it. It will save you the frustration, especially not knowing for sure whether their is a missing part or not. Plus it will save the hassle. GGBMDB
Read More At : MagLite...

The switch on our almost new Life Gear Glow 300 hour LED spot light is not working. We replaced the batteries as we assumed that was the problem. When the switch is depressed the light flashes briefly

Sounds like the switch is intermittently contacting an needs cleaned , tightened ,or replaced try some wd 40 in it .it wont hurt the electronics or take the switch apart an clean
Read More At : Life Gear Flashlights LED 300 Hr Glow Spot Red Model: LG114...

How do I remove the battery?

This is not intended to be a user replaceable battery, although I have found a replacement battery that means that SOME people have replaced them. the cost is $9 +s&h. I don't think most camping outfitters would be able to help you with it, But it would be worth a try. My suggestion would be (if you have one in your area) take it to a Batteries Plus store. They are quite good at replacing batteries that are NOT meant for user replacement. Best of luck to you.
Read More At : Coleman...

Need replacement battery for spotlight

You can purchase a battery from Black and Decker, they purchased Vectorlite in 2006, here is the link, you will need to enter the model #
Read More At : 1 Million Rechargeable Spotlight...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0477 seconds