Guide :Camping, Backpacking & Hiking : - Mag Charger System 110v (M) Model - RX1019

Maglight Rechargeable When ever I put the rubber switch cover in my mag, I can not turn the light off, but when I remove it, the switch works just like it is supposed to. Is this a common problem and if so, is there an easy fix or should I just leave the cover off.

Posted by jmpaschal26 on Oct 07, 2008

Research, Knowledge and Information :


CR4 - Thread: Leaking Battery Stuck in Mag-Lite


I had the same problem with my 4 cell mag light and mailed it to Duracell ... The waterproof switch cover fell off of the 3 ... Leaking Battery Stuck in Mag-Lite ...
Read More At : cr4.globalspec.com...

How to disassemble a maglite | rivergum.net


First off, remove the rubber switch cover. ... So there you have it, ... I cleaned all contact points and put a little arch in the ground strap. Works now.
Read More At : rivergum.net...

Tactical Flashlights: How to Use Them for Self-Defense | The ...


... but still works like a champ. ... Turn off the light and move. ... I just got my copy and I can’t wait to get started with it.
Read More At : www.artofmanliness.com...

Basic Flashlight Tutorial - An Introduction to High ...


Basic Flashlight Tutorial An Introduction to High-Performance Flashlights. ... switch it off and the light goes out. ... Another common problem is bad connections.
Read More At : www.asos1.com...

iPhone 6 Battery Replacement - iFixit


Should I just leave off ... I have to do it again I would not take the top cover off. I would put ... but you will have to the steps to remove the battery so there ...
Read More At : www.ifixit.com...

Top 52 Complaints and Reviews about DeWALT Tools


The rubber auxiliary port cover does not stay in the ... to help so I think I'm going to sell my DeWALT tools and ... just aren't lasting like they should.
Read More At : www.consumeraffairs.com...

Free Family Preparedness Class Simple Easy Proven


Free, Proven, Easy Family Preparedness ... This is a 3 Watt LED light just like ... I have a video below of a big huge 200 amp transfer switch so you can see what it ...
Read More At : www.beforethestormhits.com...

How to Prolong and Restore Lead-acid Batteries - Battery ...


The only method I could do toat was to pop the cover, remove the rubber ... lead-acid batteries. There is no ... My additive works just fine in ...
Read More At : batteryuniversity.com...

Apple’s Patented iPhone Panic Button Might Not Make You Much ...


A 2008 Bureau of Justice Statistics survey concluded that just ... There’s also the continued problem ... But individual police departments can do much worse, like ...
Read More At : gizmodo.com...

Suggested Questions And Answer :


Maglight Rechargeable When ever I put the rubber switch cover in my mag, I can not turn the light off, but when I remove it, the switch works just like it is supposed to. Is this a common problem and if so, is there an easy fix or should I just leave the cover off.


Did you replace the switch cover? is it original? does the cover look deformed under neath?call up the customer service 1-800-283-5562 or email warranty@magmail.com if the switch or cover is defective you should be sent a new one at no charge
Read More At : - Mag Charger System 110v (M) Model - RX1019...

Petzl Tikka switch is not working properly. Light not steady.


Hi,Would you describe the light as flickering and fading perhaps? Are you using rechargable or Lithium batteries?Here's an excerpt from a Petzl alert put out a couple of years ago. It may shed some light on your problem..LED light sources are susceptible to being damaged by the use of lithium batteries due to the different characteristics of lithium batteries in discharge. This has meant that some people have had problems with their headtorches failing when using such batteries... Petzl have reported this problem and other manufacturers are expected to follow suit. However this does not affect all head torches... There are problems being reported over the LED lamps in certain headtorches when used with lithium batteries. Incandescent bulbs will also suffer a reduced burn-time when used with lithium batteries although this is less severe. This is because the lithium batteries have a higher output during discharge. The benefits of a lithium battery are the increased burn time, especially at low temperatures over the traditional alkaline batery. LR6 or AA and LR03 or AAA are the two size of battery litkely to be used in a headlamp. Petzl are one of the few manufacturers to advise on this at the moment. Other manufacturers products will also be affected. The following Petzl headlamps should not be used with lithium batteries: TIKKA / ZIPKA range: TIKKINA / TIKKA / ZIPKA / TACTIKKA / TIKKA PLUS / ZIPKA PLUS / TACTIKKA PLUS / TIKKA XP / TACTIKKA XP / TIKKA XP ATEX / TIKKA XP HAZLOC. MYO range: MYOLITE 3 / MYO 3 noir / MYO XP. DUO range: DUO LED 5. SAXO AQUA. MYOBELT 3 DUO LED 3.
Read More At : Tikka Plus...

My switch o my widebeam does not work. There is


If you have a reciept go and return it and get a new one. if you cant return it then check the connections to the battery, make sure everything is touching when its turned on
Read More At : Camping, Backpacking & Hiking...

My new flashlight wont stay on


Flashlights of this type are notorious for poor design. I had one where the contact spring at the top broke its connection. Others break the ground wire when the top is unscrewed. Another design flaw is trying to solder a ground connection to the anodized aluminum case - doesn't work. I am replacing the broken ground wires with longer, more flexible ones but that's not a permanent solution. Some LED board case grounds have been repaired by scraping the solder-to-case joint although in one case I had to replace the joint by wedging in a piece of bare copper wire. Hope these tips help.
Read More At : Energizer...

The switch on our almost new Life Gear Glow 300 hour LED spot light is not working. We replaced the batteries as we assumed that was the problem. When the switch is depressed the light flashes briefly


Sounds like the switch is intermittently contacting an needs cleaned , tightened ,or replaced try some wd 40 in it .it wont hurt the electronics or take the switch apart an clean
Read More At : Life Gear Flashlights LED 300 Hr Glow Spot Red Model: LG114...

Minimag LED shuts off


Hi,First question is what type of batteries have you been using.. A fault was found by Petzl a last year that identified a problem with using certain rechargeable batteries or lithium batteries in LED lights. The problem was that the batteries have a higher output than normal batteries and the heat created was damaging the LED's, shortening their life and in a couple of cases causing burning. Petzl have fixed the problem in their models and sent out warnings to outdoor stores to warn of the problem but I don't think that has spread too far across the industry..Hope this helps..
Read More At : Mag Lite Led 2 Cell Aa Flashlight Select Color...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.backpackingtips.net || Terms of Use || Contact || Privacy Policy
Load time: 0.0184 seconds